MoWiNet 2.4/5.8GHz Dish Gain Booster

Specials

Navigation

Forms

Home > Antennas >

MoWiNet 2.4/5.8GHz Dish Gain Booster

Click here for Data Sheet
Click here for Assembly Diagram

List Price: $49.00
Our Price: $39.00

Stock Status:
(Out of Stock)

Availability: Usually Ships in 24 Hrs
Product Code: AT-REFL-MT

Qty:

Email me when Back-In-Stock

Description

Extended Information

MoWiNet 2.4/5.8 GHz 18/24db Dish Gain Booster
• One of a kind universal mounting system giving installers more options to make a solid attachment
• Included Jpole mount is not required as reflector can be mounted to any pole up to 2” (unlimited with additional clamps)
• Solid proven design and performance
• Easiest offset reflector to align using the boom tube as a sight
• Elevation angles from -80 to +80 depending on mounting configuration (-20 in standard configuration)
• Retain the use of software selectable antenna polarity (on applicable radios)

The MoWiNet reflector can achieve maximum gain by specifically adjusting for each radio. The mount is made of fiberglass reinforced Nylon66. The antenna is powder coated steel, and comes complete with all hardware and the roof/eave mount.

Works with the following radios:

Loco2 18dBi
Loco5 23.7dBi
NS2 17.5dBi
NS5 21.4dBi
NS5M 22-23dBi
5700SM 24dBi

Call for Info on using with Trangobroadband Units.

Solve many common problems with the MoWiNet total solution:

Range
Simple secure unbreakable mounting of the radio
Unique mount allows mounting to any size pole up to 2"
Lower installed price.
Quick and easy installation. Avoid the hassles of purchasing additional parts, such as mount, additional antenna + pigtail/adapters, and mounting 2 items
Reduced interference with narrow beam width
Retain the use of software selectable antenna polarity

Reflector can be used with the Loco2/5 and NS2/5 using Vertical or Horizontal Polarity MoWiNet recommends the use of Loco radios as the antenna can be kept in the focal point providing symmetrical gain. NS2/5 can be used with excellent receive results(10+dBi) but the send signal will be slightly less. MoWiNet is the only reflector manufacture supplying the necessary firmware for the Loco2 to work flawlessly past 3.1 miles.
System Gain with Reflector	24dBi @ 5.8GHz 18dBi @ 2.4GHz
Mechanical
Reflector Height	21” (53cm)
Reflector Width	19.2” (49cm)
Weight	8 lb
Mounting	Clamp mount allows mounting to any pole up to 2" Included J-pole is not required as mid pole mounting is possible
Environmental
Wind loading	- Operational 56 mph - Survival 90 mph

Suggested Accessories

Ubiquiti NanoStation5

Our Price: $89.00
Add

Ubiquiti NanoStation2

Our Price: $79.00
Add

Ubiquiti NanoStation M5 MIMO

Our Price: $89.00
Add

Motorola CanopySM 5.7GHz

Our Price: $245.00
Add

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Antennas
Antennas > 5.1 - 5.8GHz
Antennas > 2.4GHz
Antennas > 2.4GHz > Directional
Antennas > 5.1 - 5.8GHz > Directional
Mounting Hardware
Mounting Hardware > Roof Mounts
Mounting Hardware > Antenna CPE Mounts

	StationBox w/5.8GHz 18db Antenna $19.95
	Ethernet Router RB493AH $199.00
	Ethernet miniRouter RB450 $99.00
	StationBox w/2.4GHz 14db Antenna $19.95
	Laird External Watertight ECS $6.00
	Wistron DCMA-82 SuperAG 400mW $47.00
	Connectorized AP/Router RB433 $210.00
	MikroTik Dual Radio Hotspot AP Kit $242.70
	RFCoaxial Lightning Protector $19.00