 |
 |
 |
|
Aluminum Enclosure designed for WRAP.2* / ALIX.3* boards.
Cutouts for 1 LAN, DC jack, 2 SMA, DB9, 3 LEDs in back.
|
box2c |
Indoor enclosure for wrap.2* / alix.3* |
|
Status
|
active |
|
Part numbers
|
box2c = 1 LAN enclosure, RoHS compliant |
|
Use with
|
wrap2e1
wrap2e3
alix3* series
Blank bracket for alix3c1 / no opening
USB bracket for alix3c2 / with USB opening
USB+VGA bracket for alix3c3 / with USB
and VGA / audio openings
|
|
Spec
|
Aluminum Enclosure designed for WRAP.2* / ALIX.3* boards.
Cutouts for 1 LAN, DC jack, 2 SMA, DB9, 3 LEDs in back. |
|
Dimensions
|
113 x 163 x 30 mm |
|
Includes
|
Aluminum extrusion, 1.5mm Al back plate, 4 screws, rubber feet, rubber plugs
for unused SMA holes. Antenna / pigtails / WRAP board shown are not included !
Please order front plate separately. |
|
Assembly notes
|
Tools needed: Phillips screw driver, 5 mm or 3/16" nut driver. Remove hex nuts
from DB9 connector of WRAP board. Mount back plate to WRAP board, replace hex
nuts. Slide WRAP board into the enclosure, fasten the back plate using 4
screws.
Tip for reinserting self-cutting and plastic screws: To find the start of the
existing thread, turn screw counterclockwise first until you feel the start. |
|
Manufacturer
|
PC Engines |
|
Origin
|
China |
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
| Includes
|
Aluminum extrusion, 1.5mm Al back plate, 4 screws, rubber feet, rubber plugs
for unused SMA holes. Antenna / pigtails / WRAP board shown are not included
Please order front plate (Blank, USB, USB+VGA) separately. |
|
|
|
|
|
|
|
|
|
